標準 | 英文名稱 | 中文名稱 |
DVGW W543 | Pressure Resistant Hosepipes And Compensators For Drinking Water Installation; Requirements And Testing | 飲用水安裝用耐壓軟管和補償器；需求和測試 |
DIN EN 10352 | Stainless steel plumbing fittings — Fittings with press ends for metallic tubes | 不銹鋼管道配件 - 用于金屬管的帶壓端配件 |
DIN EN 1074-1 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements | 供水閥門 - 適用性要求和適當的驗證測試 - 第 1 部分：一般要求 |
DIN EN 1074-2 | Valves for water supply -Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves | 供水閥門 - 適合用途要求和適當的驗證測試 - 第 2 部分：隔離閥 |
DIN EN 1111 | Sanitary Tapware - Thermostatic Mixing Valves (pn 10) - General Technical Specification | 衛生水龍頭 - 恒溫混合閥 (pn 10) - 通用技術規范 |
DIN EN 1112 | Sanitary Tapware - Shower Outlets for Sanitary Tapware for Water Supply Systems of Type 1 and Type 2 - General Technical Specification | 衛生水龍頭 - 1 型和 2 型供水系統用衛生水龍頭的淋浴出口 - 通用技術規范 |
DIN EN 1113 | Sanitary Tapware - Shower Hoses for Sanitary Tapware for Water Supply Systems of Type 1 and Type 2 - General Technical Specification | 衛生水龍頭 - 1 型和 2 型供水系統用衛生水龍頭的淋浴軟管 - 通用技術規范 |
DIN EN 1213 | Building Valves - Copper Alloy Stopvalves For Potable Water Supply In Buildings - Tests And Requirements | 建筑閥門 - 建筑飲用水用銅合金截止閥 - 測試和要求 |
DIN EN 12293 | Plastics Piping Systems - Thermoplastics Pipes And Fittings For Hot And Cold Water - Test Method For The Resistance Of Mounted Assemblies To Temperature Cycling | 塑料管道系統 - 熱水和冷水用熱塑性塑料管道和配件 - 已安裝組件對溫度循環的抵抗力的測試方法 |
DIN EN 12294 | Plastics Piping Systems - Systems For Hot And Cold Water - Test Method For Leaktightness Under Vacuum | 塑料管道系統-熱水和冷水系統-真空下密封性的測試方法 |
DIN EN 12295 | Plastics Piping Systems - Thermoplastics Pipes And Associated Fittings For Hot And Cold Water - Test Method For Resistance Of Joints To Pressure Cycling | 塑料管道系統 - 熱水和冷水用熱塑性塑料管道和相關配件 - 接頭耐壓力循環的試驗方法 |
DIN EN 1253-1 | Gullies for buildings | 建筑物的溝壑 第 1 部分：水封深度至少為 50 mm 的夾層排水溝 |
DIN EN 1253-2 | Gullies for buildings | 建筑物的溝壑 第 2 部分：無存水彎的屋頂排水溝和地溝 |
DIN EN 1254-1 | Copper And Copper Alloys - Plumbing Fittings - Fittings With Ends For Capillary Soldering Or Capillary Brazing To Copper Tubes | 銅和銅合金 - 管道配件 - 用于毛細管焊接或毛細管釬焊到銅管的端部配件 |
DIN EN 1254-2 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes | 銅和銅合金 - 管道配件 - 第 2 部分：與銅管一起使用的帶壓縮端的配件 |
DIN EN 1254-3 | Copper And Copper Alloys - Plumbing Fittings - Fitting With Compression Ends For Use With Plastics Pipes | 銅和銅合金 - 管道配件 - 帶壓縮端的配件，用于塑料管道 |
DIN EN 1254-4 | Copper and copper alloys - Plumbing fittings - Part 4: Fittings with threaded end connections | 銅和銅合金 - 管道配件 - 第 4 部分：帶螺紋端接的配件 |
DIN EN 1254-5 | Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes | 銅和銅合金 - 管道配件 - 第 5 部分：用于毛細管釬焊到銅管的短端配件 |
DIN EN 1254-6 | Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends | 銅和銅合金 - 管道配件 - 第6部分：帶推入配合端的配件 |
DIN EN 1254-8 | Copper and copper alloys. Plumbing fittings. Fittings with press ends for use with plastics and multilayer pipes | 銅及銅合金。水暖配件。用于塑料和多層管的帶壓端接頭 |
DIN EN 1286 | Sanitary Tapware - Low-pressure Mechanical Mixing Valves - General Technical Specification | 衛生水龍頭 - 低壓機械混合閥 - 一般技術規范 |
DIN EN 1287 | Sanitary Tapware - Low Pressure Thermostatic Mixing Valves - General Technical Specification | 衛生水龍頭 - 低壓恒溫混合閥 - 通用技術規范 |
DIN EN 13618 | Flexible Hose Assemblies In Drinking Water Installations - Functional Requirements And Test Methods | 飲用水裝置中的柔性軟管組件 - 功能要求和測試方法 |
DIN EN 13828 | Building Valves - Manually Operated Copper Alloy And Stainless Steel Ball Valves For Potable Water Supply In Buildings -tests And Requirements | 建筑閥門 - 用于建筑飲用水的手動操作銅合金和不銹鋼球閥 - 測試和要求 |
DIN EN 15091 | Sanitary Tapware - Electronic Opening And Closing Sanitary Tapware | 衛生水龍頭 - 電子開合衛生水龍頭 |
DIN EN 16145 | Sanitary Tapware - Extractable Outlets For Sink And Basin Mixers - General Technical Specification | 衛生水龍頭 - 水槽和面盆混合器的可抽出式出口 - 通用技術規范 |
DIN EN 16146 | Sanitary Tapware - Extractable Shower Hoses For Sanitary Tapware For Supply Systems Type 1 And Type 2 - General Technical Specification | 衛生水龍頭 - 用于供應系統 1 型和 2 型的衛生水龍頭的可抽出淋浴軟管 - 通用技術規范 |
DIN EN 1717 | Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow | 水裝置中的飲用水污染防護和防止回流污染裝置的一般要求 |
DIN EN 200 | Sanitary Tapware – Single taps and combination taps for water supply systems of type 1 and type 2 – General technical specification | 衛生水龍頭 - 1 型和 2 型供水系統的單水龍頭和組合水龍頭 - 通用技術規范 |
DIN EN 246 | Sanitary Tapware - General Specifications For Flow Rate Regulators | 衛生水龍頭 - 流量調節器的一般規范 |
DIN EN 248 | Sanitary Tapware - General Specification For Electrodeposited Coatings Of Ni-cr | 衛生水龍頭。鎳鉻電沉積涂層的通用規范 |
DIN EN 274-1 | Waste Fittings For Sanitary Appliances - Part 1: Requirements | 衛生器具的廢物配件 - 第 1 部分：要求 |
DIN EN 274-2 | Waste Fittings For Sanitary Appliances - Part 2: Test Methods | 衛生器具的廢棄配件 - 第 2 部分：測試方法 |
DIN EN 61770 | Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets | 連接到水管的電器 - 避免反虹吸和軟管組故障 |
DIN EN 712 | Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull- out under constant longitudinal force | 熱塑性塑料管道系統。壓力管和管件之間的端部承載機械接頭。恒定縱向力下抗拔出性的試驗方法 |
DIN EN 713 | Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes – Test method for leaktightness under internal pressure of assemblies subjected to bending | 塑料管道系統 - 管件和聚烯烴壓力管之間的機械接頭 - 彎曲組件在內部壓力下的密封性試驗方法 |
DIN EN 816 | Sanitary tapware – Automatically shut-off valves PN10 | 衛生水龍頭 – 自動關閉閥 PN10 |
DIN EN 817 | Sanitary tapware – Mechanical mixing valves (PN10) – General technical specifications | 衛生水龍頭 – 機械混合閥 (PN10) – 一般技術規范 |
DIN EN 921 | Plastics piping systems - Thermoplastics pipes - Determination of resistance to internal pressure at constant temperature | 塑料管道系統 - 熱塑性塑料管道 - 恒溫下耐內壓的測定 |
DIN EN 997 | WC pans and WC suites with integral trap | WC 馬桶和 WC 套件，帶集成式存水彎 |
